Suffolk County · Licensed · Insured · Family-Owned
Historic Masonry Restoration in Point of Pines, Revere, MA
Looking for historic masonry restoration in Point of Pines in Revere, MA? Ultimate Boston Masonry is a licensed, insured, family-owned masonry contractor serving Revere and the rest of Suffolk County from our Boston base. Salt air off Revere Beach accelerates mortar loss. We use denser mortar and water repellents on exposed elevations.
Housing in Point of Pines in Revere includes a mix of Victorian, colonial, and mid-century homes, and wind-driven rain from nor'easters is what wears this masonry down. That is why our historic masonry restoration work starts with understanding what your building is made of — brick type, stone, mortar hardness, and drainage — before we price anything. Greater Boston has some of the oldest masonry in the country — Federal-era brick, Roxbury puddingstone, Quincy granite, and Back Bay brownstone. We restore it with lime mortars and methods that follow National Park Service Preservation Brief guidance, so repairs last without harming original material.
Response time in Revere: Same-day estimates, most weeks · Typical range $2,500 – $45,000

Free historic masonry restoration quote in Revere
Tell us about the project and we'll come out to price it — no charge, no pressure.
Scope
What our historic masonry restoration in Revere includes
- Mortar analysis and lime mortar matching
- Brownstone and sandstone patching and dutchman repairs
- Granite resetting and repointing
- Gentle masonry cleaning — no sandblasting
- Documentation for historic district commissions
- Parapet, cornice, and belt course repair
Process
How historic masonry restoration works in Point of Pines, Revere
1. Free on-site assessment
We sample mortar and inspect the facade, noting original materials and prior repairs.
2. Written fixed-price scope
You get a preservation-minded scope suitable for local historic commission review.
3. Skilled masonry work
Work proceeds with lime mortars, matched stone, and hand tools where needed.
4. Cleanup and final walkthrough
Facade is cleaned gently and documented with photos for your records.
Local FAQ
Historic Masonry Restoration in Point of Pines, Revere: questions answered
How much does historic masonry restoration cost in Point of Pines, Revere, MA?
Most historic masonry restoration projects in Revere fall between $2,500 – $45,000. A single facade repoint in lime mortar sits at the low end; full brownstone or multi-elevation restoration with staging reaches the top of the range. We give a free written, fixed-price estimate after an on-site look.
How quickly can you start historic masonry restoration in Point of Pines, Revere?
Same-day estimates, most weeks in Revere. Most projects are scheduled within one to three weeks, and safety hazards are prioritized.
Do I need a permit for historic masonry restoration in Revere?
Minor repairs usually don't need a permit, but rebuilds, new structures, and tall retaining walls often do under the Massachusetts building code. We check with the Revere building department and pull permits when required.
Which areas near Point of Pines, Revere do you also serve?
Besides Beachmont, Point of Pines, Oak Island, we regularly work in nearby Boston, Cambridge, Somerville, and every community within 45 miles of Boston.
Are you licensed and insured to work in Revere?
Yes. Ultimate Boston Masonry is licensed, fully insured, and family-owned with 5 years of experience on Greater Boston brick and stone.
Why does historic brick need lime mortar?
Older brick is soft and porous. Lime mortar is softer and more breathable than the brick, so moisture and movement pass through the joints instead of cracking the brick itself.
Do you work in Boston historic districts?
Yes. We regularly prepare scopes that suit review by the Boston Landmarks Commission, Back Bay Architectural Commission, and local historical commissions in Cambridge, Brookline, and elsewhere.
Historic Masonry Restoration near Point of Pines, Revere
Also available in these Revere neighborhoods and nearby towns.
- Historic Masonry Restoration in Beachmont
- Historic Masonry Restoration in Oak Island
- Historic Masonry Restoration in Boston
- Historic Masonry Restoration in Cambridge
- Historic Masonry Restoration in Somerville
- Historic Masonry Restoration in Brookline
- Historic Masonry Restoration in Newton
- Historic Masonry Restoration in Quincy
- Historic Masonry Restoration in Malden
- Historic Masonry Restoration in Medford
Other masonry services in Point of Pines, Revere
- Chimney Repair & Rebuilds in Point of Pines
- Brick & Stone Repointing in Point of Pines
- Retaining Walls in Point of Pines
- Patios & Walkways in Point of Pines
- Stone Steps & Stoops in Point of Pines
- Foundation & Basement Masonry in Point of Pines
- Stone Veneer & Facades in Point of Pines
- Outdoor Fireplaces & Fire Pits in Point of Pines
- Brick Repair & Replacement in Point of Pines
- Stucco & Foundation Parging in Point of Pines
- Masonry Waterproofing & Sealing in Point of Pines
- Brick Walls, Pillars & Columns in Point of Pines
- Indoor Fireplace & Firebox Repair in Point of Pines
- Paver & Cobblestone Driveways in Point of Pines
- Emergency Masonry Repair in Point of Pines
Learn more about our historic masonry restoration service or see all masonry services in Revere.
Homeowner guides
Read before booking historic masonry restoration
7 min read
What Is the Difference Between Tuckpointing and Repointing?
Plain-English explanation of repointing, tuckpointing, and pointing for brick homes in Boston, with when each is used and what each costs.
Read the guide →7 min read
How Long Does Brick Repointing Last in New England?
How many years a repointing job lasts in Boston's climate, what shortens it, and how to make joints last 50 years.
Read the guide →7 min read
What Type of Mortar Is Best for Old Brick Homes?
Guide to ASTM C270 mortar types M, S, N, O and K, lime mortar, and which is right for pre-1930 Boston-area brick.
Read the guide →