Essex County · Licensed · Insured · Family-Owned

Patios & Walkways in McIntire District, Salem, MA

Looking for patios & walkways in McIntire District in Salem, MA? Ultimate Boston Masonry is a licensed, insured, family-owned masonry contractor serving Salem and the rest of Essex County from our Boston base. Salem has some of the oldest masonry in the country. Historic lime mortar and correct joint profiles are non-negotiable here.

Housing in McIntire District in Salem includes older brick multi-families and colonials built before 1940, and road salt and plow damage every winter is what wears this masonry down. That is why our patios & walkways work starts with understanding what your building is made of — brick type, stone, mortar hardness, and drainage — before we price anything. The difference between a patio that heaves and one that stays flat is entirely underneath it. We excavate deep, compact in lifts, and set stone with edge restraint so it survives winter.

Response time in Salem: Estimates within 48 hours · Typical range $28 – $65 per square foot

Patios & Walkways project near McIntire District, Salem, MA

Free patios & walkways quote in Salem

Tell us about the project and we'll come out to price it — no charge, no pressure.

Or call 781-818-1668 · Mon–Sat 8am–5pm

Scope

What our patios & walkways in Salem includes

  • Layout and elevation planning for positive drainage
  • Excavation and compacted base in lifts
  • Bluestone, granite, brick, or concrete paver installation
  • Polymeric sand or mortar-set joints
  • Edge restraint and border detailing
  • Steps, landings, and fire pit integration

Process

How patios & walkways works in McIntire District, Salem

  1. 1. Layout and pitch

    We mark the footprint and set elevations so water runs away from the house.

  2. 2. Excavate and compact

    Eight to twelve inches of base material, compacted in lifts for frost resistance.

  3. 3. Set the surface

    Stone or pavers laid to pattern, cut clean at borders, and leveled course by course.

  4. 4. Joint and finish

    Joints filled, surface compacted or sealed, and surrounding lawn and beds restored.

Local FAQ

Patios & Walkways in McIntire District, Salem: questions answered

How much does patios & walkways cost in McIntire District, Salem, MA?

Most patios & walkways projects in Salem fall between $28 – $65 per square foot. Concrete pavers are the affordable end. Full-thickness bluestone and intricate cut patterns run higher. We give a free written, fixed-price estimate after an on-site look.

How quickly can you start patios & walkways in McIntire District, Salem?

Estimates within 48 hours in Salem. Most projects are scheduled within one to three weeks, and safety hazards are prioritized.

Do I need a permit for patios & walkways in Salem?

Minor repairs usually don't need a permit, but rebuilds, new structures, and tall retaining walls often do under the Massachusetts building code. We check with the Salem building department and pull permits when required.

Which areas near McIntire District, Salem do you also serve?

Besides McIntire District, Derby Street, Salem Willows, we regularly work in nearby Lynn, Beverly, Peabody, and every community within 45 miles of Boston.

Are you licensed and insured to work in Salem?

Yes. Ultimate Boston Masonry is licensed, fully insured, and family-owned with 5 years of experience on Greater Boston brick and stone.

What patio material holds up best around Boston?

Full-thickness bluestone and granite handle freeze-thaw and salt best. Quality concrete pavers are close behind at a lower cost.

Will my patio sink or heave?

Not with the right base. Heaving comes from shallow base depth, poor compaction, or trapped water, all of which we address during excavation.

Call Now — 781-818-1668