Suffolk County · Licensed · Insured · Family-Owned

Patios & Walkways in Revere, MA

Name: Ultimate Boston Masonry — Revere
Address: Revere, MA, US
Telephone: 781-818-1668
Price range: $$

Looking for patios & walkways in Revere, MA? Ultimate Boston Masonry is a licensed, insured, family-owned masonry contractor serving Revere and the rest of Suffolk County from our Boston base. Salt air off Revere Beach accelerates mortar loss. We use denser mortar and water repellents on exposed elevations.

Housing in Revere includes granite stoops, brick chimneys, and stone garden walls, and road salt and plow damage every winter is what wears this masonry down. That is why our patios & walkways work starts with understanding what your building is made of — brick type, stone, mortar hardness, and drainage — before we price anything. The difference between a patio that heaves and one that stays flat is entirely underneath it. We excavate deep, compact in lifts, and set stone with edge restraint so it survives winter.

Response time in Revere: Same-day estimates, most weeks · Typical range $28 – $65 per square foot

Call 781-818-1668 Book Now

Patios & Walkways project near Revere, MA

Free patios & walkways quote in Revere

Tell us about the project and we'll come out to price it — no charge, no pressure.

Scope

What our patios & walkways in Revere includes

Layout and elevation planning for positive drainage
Excavation and compacted base in lifts
Bluestone, granite, brick, or concrete paver installation
Polymeric sand or mortar-set joints
Edge restraint and border detailing
Steps, landings, and fire pit integration

Process

How patios & walkways works in Revere

1. Layout and pitch
We mark the footprint and set elevations so water runs away from the house.
2. Excavate and compact
Eight to twelve inches of base material, compacted in lifts for frost resistance.
3. Set the surface
Stone or pavers laid to pattern, cut clean at borders, and leveled course by course.
4. Joint and finish
Joints filled, surface compacted or sealed, and surrounding lawn and beds restored.

Local FAQ

Patios & Walkways in Revere: questions answered

How much does patios & walkways cost in Revere, MA?

Most patios & walkways projects in Revere fall between $28 – $65 per square foot. Concrete pavers are the affordable end. Full-thickness bluestone and intricate cut patterns run higher. We give a free written, fixed-price estimate after an on-site look.

How quickly can you start patios & walkways in Revere?

Same-day estimates, most weeks in Revere. Most projects are scheduled within one to three weeks, and safety hazards are prioritized.

Do I need a permit for patios & walkways in Revere?

Minor repairs usually don't need a permit, but rebuilds, new structures, and tall retaining walls often do under the Massachusetts building code. We check with the Revere building department and pull permits when required.

Which areas near Revere do you also serve?

Besides Beachmont, Point of Pines, Oak Island, we regularly work in nearby Boston, Cambridge, Somerville, and every community within 45 miles of Boston.

Are you licensed and insured to work in Revere?

Yes. Ultimate Boston Masonry is licensed, fully insured, and family-owned with 5 years of experience on Greater Boston brick and stone.

What patio material holds up best around Boston?

Full-thickness bluestone and granite handle freeze-thaw and salt best. Quality concrete pavers are close behind at a lower cost.

Will my patio sink or heave?

Not with the right base. Heaving comes from shallow base depth, poor compaction, or trapped water, all of which we address during excavation.